Elhyvlar, Fräsmaskiner

Compact metal edge cutter for 45° chamfers and radii of 2 to 3 mm on visible edges. Oxide- and burr-free surfaces as optimal preparation for the application of powder and lacquer coatings that provide maximum corrosion protection. Motor with patented dust protection. One-touch Controller tool-free milling depth setting in steps of 0.1 mm, locking points for short setting times, prevents accidental adjustment of the milling depth during work. Vario-Constamatic (VC) full-wave electronics with setting dial for working with material-adapted speeds that remain almost constant under load. Electronic safety shutdown of the motor if the tool is blocked. Electronic overload protection, soft start and restart protection. Slim milling head with regular turning inserts in carbide and ball bearing starting ring for work in pipes and on roundings. Guide stop for an even work result and high surface quality when processing straight edges. Tool-free adjustable stirrup handle.
Standard equipment: 2 pcs turning plates in carbide 45° chamfer (ISO: DCMT 11 T 304), 2 pcs turning plates in carbide radius R2, 2 pcs turning plates in carbide radius R3, guide stop, screwdriver for Torx screws 15, stirrup handle and stackable storage bag metaBOX 215.

A very efficient machine for removing varnish and paint on flat surfaces. Also suitable for untreated wood and processing rebates through the extra side cutters on the milling head.
Safety coupling so the machine does not kick backwards if you e.g. hit a nail. Stepless adjustment of the cutting depth: 0 - 0.3 mm.
Standard equipment: 4 carbide tipped inserts, adapter for extraction, combination wrench and storage box.

Fast and efficient planer for removing weld strands in a single work step. One-touch Controller, tool-free adjustment of the milling depth in steps of 0.1 mm. Vario-Tacho-Constamatic (VTC) full-wave electronics with setting dial for working with material-adapted speeds that remain constant under load. Electronic soft start and restart protection. Ready for use in seconds thanks to magnetic guide rail (50 cm long, extendable) with tool-free fixation. Simple and convenient replacement of turning plates on the milling head. Narrow grip area and large clamp handle with tool-free adjustment.
Standard equipment: Magnetic guide rail (length 50 cm), 3 universal carbide turning plates, clamp handle, screwdriver for Torx screws 15, screwdriver SW 4 with T -handle, U-wrench SW 10 and plastic box.

Concrete groove cutter for fast milling of grooves and joints in concrete with two diamond blades at the same time. Efficient 1800W motor allows you to mill 7-35 mm wide and 7-45 mm deep grooves in concrete, e.g. for various electrical and water pipes. Supplied without diamond blades.
Standard equipment: Storage bag.

Electric planer with continuously adjustable chip and seam depth. Rubberized grip. Equipped with protective heel. Can be equipped with chip suction adapter and dust bag (sold separately). Dimensions (L x H) 296x165 mm
Standard equipment: Planer blade (HM), setting template and key.

Electric planer with ergonomic and rubber-coated handle that results in a safe and comfortable working position. Simple depth adjustment using the steering wheel control. Quick change of planer blades, light weight and good balance. The support foot at the rear edge of the table protects the work surface against the rotating cutter.
Standard equipment: Storage bag MakPac.

Electric planer with efficient motor of 1050 W. Electronic power adjustment. Simple depth setting. Chip exhaust on any side of the machine. Soft start. The support foot at the rear edge of the table protects the work surface against the rotating cutter.
Standard equipment: Carbide reversible cutter and storage bag MakPac.

Joint cutter with a powerful 1700 W motor with a unique cover that effectively absorbs dust. With spindle lock for quick blade change. Comes with: transport bag and flexible 1-meter hose that fits the most common vacuum cleaners. For joint milling up to 8 mm. Supplied without diamond cutting blade.

Hand router with 1200 W motor. For milling grooves, edge profiles or special recesses in wood. Electronic Speed ??Preselection allows you to set an exact maximum speed suitable for milling in different materials and tasks. Quick setting of milling depth. Spindle locking with easy change of milling steel. Soft grip surfaces for safe and comfortable grip. Transparent chip guard that protects against flying chips for comfortable work while the possibility to connect a vacuum cleaner helps to keep the work space clean.
Standard equipment: Collet Ø 6 mm, Collet Ø 8 mm, Collet Ø 1/ 4", groove cutter Ø 8 mm, extraction adapter, parallel stop, fixed key, copy sleeve and centering pin.

Hand router with 1400 W motor with constant electronics and adjustable milling depth and speed setting. Guide rail for milling precise, straight grooves and circles. Large, ergonomically designed handles with soft grip. Quick milling changes thanks to spindle locking. SDS system for tool-free changing of inserts. Built-in work lighting.
Standard equipment: Parallel stop, vacuum cleaner adapter, 1 pc centering pin, 1 pc slot cutter (Ø 8 mm), 1 pc copy socket, 3 pc collet sockets (6 mm, 8 mm and 1/4" ), fixed key and plastic storage bag.

Compact and user-friendly overhand router with high working power. Electronically variable speed control in 6 steps located in the handle. Electronic power control. Easily accessible switch. Soft start (start current limitation). Spindle lock for easy replacement of milling steel. Graduated depth setting. Three-stage depth stop with fixed setting options. Steering column protected by rubber bellows. Ergonomic rubberized grip.
Standard equipment: Parallel hold, copy flange, collet 8 mm, suction nozzle, key and storage bag.

Compact hand router with soft start. Electronic speed controller with constant power and speed controller located on the handle for easy access. Spindle lock for easy replacement of milling steel. Steering column protected by rubber bellows. Can be fitted with chip suction adapter. Graduated depth setting. Three-stage depth stop with fixed setting options.
Standard equipment: Parallel stop, copy flange, key and stackable storage bag.

Compact hand router with soft start. Electronic speed controller with constant power and speed controller located on the handle for easy access. Spindle lock for easy replacement of milling steel. Steering column protected by rubber bellows. Can be fitted with chip suction adapter. Graduated depth setting. Three-stage depth stop with fixed setting options. Ergonomic rubberized grip.
Standard equipment: 12-piece milling steel set in aluminum case, parallel stop, copy flange, key and stackable storage case HSC.

Hand router with ergonomic design. Simple depth adjustment. Rubberized handles provide a secure grip. Can be driven in guide rail using adapter (194579-2). Cover plate in front of the processing area.
Standard equipment: Side stop, collet 6 mm and 8 mm, tool keys and storage box MakPac.

For universal use. Compact construction and ergonomic grip surfaces with Softgrip. Combined coarse and fine setting. Spindle locking and self-releasing clamping sleeve for quick cutter changes. The finger grips provide better stability, especially when working on edges. Compact and robust design thanks to sturdy aluminum housing with a long service life.
Standard equipment: Craftsman case, parallel stop, guide, collet with 6 mm union nut, collet with 8 mm union nut, fixed spanner 17 mm and storage box.

Metal edge cutter for chamfer heights up to 15 mm for pre-processing of welding joints. Motor with patented dust protection. One-touch Controller tool-free milling depth setting in steps of 0.1 mm, locking points for short setting times, prevents accidental adjustment of the milling depth during work. Electronic overload protection, soft start and restart protection. Precise setting of the phase angle directly via control plates. Universal milling head with three turning plates in carbide for all bevel angles of 0-90°. Controlled work thanks to large guide plates. Stop roller for guiding on pipes for easy processing of welding joints. Tool-free adjustable stirrup handle. Side plates divert chips to protect the user.
Standard equipment: 3 universal carbide turning plates, stop roller, screwdriver for Torx screws 15, screwdriver SW 4 with T-handle, U-wrench SW 10 , stirrup handle and sheet steel storage box.

Flap milling cutter for precise groove milling. Infinitely adjustable stop in height for easy adjustment. Markings for precise positioning of the biscuit coupling. Precise milling depth adjustment without tools.
Standard equipment: Carbide disc cutter, ratchet wrench, dust bag, base plate and storage box.

Special machine for joining details in wood. Robust aluminum front protection, angled from 0-90°, with fixed positions 0°, 45° and 90°. Six different cutting depths for biscuits no. 0, no. 10 and no. 20. Precise adjustment of side stops.
Standard equipment: Key, HM blade, dust collector and storage bag MakPac.

Practical multi-function router for carpentry or hobby, cuts grooves and decorative edges in wood. Soft start function for safe start. Variable speed and electronic speed adjustment. Double insulated. Dust collector. With a wide range of accessories available (not included).
Standard equipment: Collet 6mm and collet 8mm.

Light and flexible masonry router. The track width is set without the protective cover having to be dismantled. Closed dust cover for dust extraction. Electronics with overload protection and soft start.
Standard equipment: 2 diamond cutting blades, screwdriver, support handle, keys and storage box