Skyddshuvor

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted breathing protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system and the head. Impact-resistant and chemical-resistant visor. Supplied air keeps the visor fog-free. Adjustable head position. Fixed, flexible breathing hose. Equipped with exhalation valve. Also protects the head and shoulders, has adjustable neck width and adjustable distance to the face.
Contents: Hood with breathing tube, cleaning cloth and instructions for use.
Use temperature: -10° C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight: 480 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005

Protective hood intended for use together with Sundström half masks and full masks with filter or compressed air additive SR 307 and with SR 90 Airline. Protects against dust and particles as well as small amounts of splashes and drops. Made of Tyvek material and can be used in any situation where a half mask can be used. However, does not protect against toxic, corrosive or irritating vapors or aerosols. The hood is intended for short-term use and is not suitable for cleaning.
Use temperature: -10°C - +55°C
Weight: 28 g

Escape hood with filter for evacuation in case of fire and/or chemical accidents. Filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of flame-resistant and chemical-resistant material. The hoods are vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with gas filter SR 331-2 ABEK1-CO and particle filter SR 510 P3. The filter combination protects against carbon monoxide and other toxic gases and particles that can form in the event of a fire and also against the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors, eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Lifespan 10 years. Approved as a portable escape hood and delivered in a flexible nylon emergency bag, which can be attached to the belt, for example.
Usage temperature: -20°C - +55°C
Nominal protection factor: 50
Weight: 700 g < br>
Approved/Certified according to:
EN 403:2004
EN 14387:2004 + A1:2008

The escape hood is a filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood protects for at least 15 minutes and is used in an emergency, when working in, for example, a tunnel or a cistern, where a quick evacuation is required. The hood is packed in a hard plastic case that can be attached to the belt. Flight hood 7530 has the filter combination ABEK CO P3 and protects against carbon monoxide, organic gases and vapors such as solvents. Also inorganic gases and vapours: for example chlorine, hydrogen sulphide and hydrogen cyanide and acidic gases and vapours: for example sulfur dioxide and hydrogen fluoride, ammonia and certain amines.
Approval according to EN 403:2004 and DIN 58647-7

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted breathing protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system and the head. Impact-resistant and chemical-resistant visor. Supplied air keeps the visor fog-free. Adjustable head position. Fixed, flexible breathing hose. Equipped with an exhalation valve.
Contents: Hood with breathing hose, cleaning tissue and instructions for use.
Using temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight : 360 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted respiratory protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system, head and shoulders. Exchangeable hood in Tyvec. Sight glass in PETG plastic. Supplied air keeps the visor fog-free. Adjustable head position. Adjustable neck width. Flexible breathing hose. 
Contents: Hood with breathing hose, cleaning tissue and instructions for use. 
Use temperature: -10°C - +55°C < br>Assigned protection factor: 100 (3A, 3B), 200 (TH3) 
Nominal protection factor: 200 (3A, 3B), 500 (TH3)  ;
Weight: 450 g 

Approved/Certified according to: 
EN 12941:1998 + A2:2008 
EN 14594:2005

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted respiratory protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system and the head. Exchangeable hood in Tyvec. Sight glass in PETG plastic. Supplied air keeps the visor fog-free. Adjustable head position. Adjustable face seal. Flexible breathing hose. Equipped with an exhalation valve. 
Contents: Hood with breathing hose, cleaning tissue and instructions for use. 
Use temperature: -10°C - +55°C 
Assigned protection factor: 100 (3A, 3B), 200 (TH3) 
Nominal protection factor: 200 (3A, 3B), 500 (TH3)  
Weight: 420 g 

Approved/Certified according to: 
EN 12941:1998 + A2:2008 < EN 14594:2005

Protective hood intended for use together with Sundström half masks and full masks with filter or compressed air additive SR 307 and with SR 90 Airline. Made of chemical resistant material and protects against splashes and drips from most solvents and acids in lower concentrations. Prolonged contact with certain solvents in liquid form can, however, affect the material. The hood is extra roomy so that both a protective helmet and hearing protection can be worn under the hood if necessary. The hood goes down over the shoulders, back and chest. Anti-fog treated sight glass. The hood can withstand approx. 10 machine washes (without spinning), max 40°C.
Usage temperature: -10°C - +55°C
Weight: 200 g

Durable compressed air-fed hood with large impact-resistant visor. Breathing apparatus with continuous air flow for connection to compressed air. The hood is especially intended for heavy and long-term work in environments where the pollutants have poor warning properties or are particularly toxic. The hood is made of chemical-resistant material and has an adjustable head position. Material that is not capable of sparking upon friction, which enables use in explosive/flammable environments. Replaceable polycarbonate sight plate that can be fitted with a protective foil. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Hood with breathing hose, control valve, belt, flow meter, protective film and user manual.
Working pressure: 4-7 bar
Air flow: 150-240 l/min
Usage temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B)
Nominal protection factor: 200 (3A, 3B)
Weight: 770 g (without control valve)

Approved/Certified according to:
EN 14594:2005
EN 140:1998

Soft hood with integrated headband, used together with battery-powered fan units or compressed air systems from 3M. In addition to breathing protection, the hood protects the head and face and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of laminated polypropylene. Polyester visor.
Conforms to SS-EN12941 TH3 (with 3M Jupiter™). SS-EN14594 3A (with 3M Flowstream™, Vortemp, Vortex regulators, Versaflo TR-300 and Versaflo TR-600).

Soft hood with integrated headband, used together with battery-powered fan units or compressed air systems from 3M. In addition to breathing protection, the hood protects the head, face, neck and shoulders and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of surface-treated polypropylene, which is a softer, quieter and more durable fabric. Visor in polyester.
Conforms to SS-EN12941 TH3 (with 3M Jupiter). SS-EN14594 3A (with 3M Versaflo TR-300, Flowstream, Vortemp and Vortex regulators).

Soft hood with simple collar and comfort headband, used in conjunction with battery powered fan units or compressed air systems from 3M. The comfort headband allows for personal settings, the air flow can also be regulated. In addition to breathing protection, the hood protects the head, face, neck and shoulders and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of laminated polypropylene. Visor in polyester.
Conforms to SS-EN12941 TH3 (with 3M Jupiter). SS-EN14594 3A (with 3M Versaflo TR-300, Flowstream, Vortemp and Vortex regulators).

Soft hood with double collars and comfort headband, used with battery powered fan units or compressed air systems from 3M. The comfort headband allows for personal settings, the air flow can also be regulated. In addition to breathing protection, the hood protects the head, face, neck and shoulders and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of laminated polypropylene. Visor in polyester.
Conforms to SS-EN12941 TH3 (with 3M Jupiter). SS-EN14594 3A (with Versaflo TR-300, Versaflo TR-600, Flowstream, Vortemp and Vortex controllers).

Soft hood adapted for spray painting. With double collars and comfort headband, used with battery powered fan units or compressed air systems from 3M. The comfort headband allows for personal settings, the air flow can also be regulated. In addition to breathing protection, the hood protects the head, face, neck and shoulders and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of special fabric for spray painting, also with an inner laminate that prevents paint from seeping through. Acetate visor.
Conforms to SS-EN12941 TH3 (with 3M Jupiter). SS-EN14594 3A (with 3M Versaflo TR-300, Flowstream, Vortemp and Vortex regulators).

Escape hood with filter for evacuation in case of chemical accidents. Filtering respirator in combination with hood for use during evacuation in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of chemical-resistant material. The hood is vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with combination filter SR 299-2 ABEK1-Hg-P3. The filter combination protects against all types of particles and the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Hg, mercury vapor. Lifespan 10 years. Approved as a portable escape hood and delivered in a flexible nylon emergency bag, which can be attached to the belt, for example.
Usage temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 680 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of chemical accidents. Filtering respirator in combination with hood for use during evacuation in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of chemical-resistant material. The hood is vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with combination filter SR 299-2 ABEK1-Hg-P3. The filter combination protects against all types of particles and the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Hg, mercury vapor. Lifespan 10 years. Approved for stationary storage only. 
Operation temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 680 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of fire and/or chemical accidents. Filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of flame-resistant and chemical-resistant material. The hoods are vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with gas filter SR 331-2 ABEK1-CO and particle filter SR 510 P3. The filter combination protects against carbon monoxide and other toxic gases and particles that can form in the event of a fire and also against the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors, eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Lifespan 10 years. Approved for stationary storage only. 
Operation temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 700 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008