Efficient and powerful 3-phase high pressure washer with working pressure of up to 180 bar. Equipped with 15 m high-pressure hose on winder. Low noise level of the motor pump unit, which makes it also suitable for use in public institutions and smaller cleaning companies. High quality motor pump unit with 1450 rpm. Water volume of up to 740 l/h. Brass top piece and ceramic pistons. Automatic start/stop. Detergent tank of 2.5 liters. With foam equipment that is an easy and economical way to apply cleaning agents, when needed. The foam equipment generates a thick layer of foam, which remains on the surface, which increases the cleaning effect. The washer has no internal injector for detergent. It reduces energy loss and provides increased nozzle pressure and increased cleaning effect. The pump's oil tank has an oil level glass and a smart empty/fill function. Removable cover provides easy access to the pump. Innovative holder protects the flush handle against damage during storage and during transport. Rotatable cable hook makes it easy to roll the electric cable on and off. Robust design with 250 mm large wheels facilitates transport on uneven ground and on stairs. Aluminum handle. Max feed water temperature 60°C.
Standard equipment: 15 m high-pressure hose on reel, flush handle Ergo 2000 standard, 4-in-1 flush tube with nozzle (0370, Bronze), Gardena-compatible tap (3/ 4") and set with male, female and reliever (Ergo System).

Mobile air-driven lubricator for 18-20 kg cans. Supplied complete with efficient lubrication pump for grease. Pressure ratio 55:1.
Contents:
Compressed air-driven lubrication pump for 18-20 kg can, barrel lid 330 mm, follower lid 260-290 mm, lubrication handle with Z swivel, 6 m lubrication hose and 2 - wheeled cart.

High-foaming alkaline detergent and degreaser suitable for washing vehicles as well as facades or other surfaces. Simple and effective cleaning method. Applied with a foam sprayer. The foam then lingers and dissolves the dirt. Dissolves road dust, soot, pigment dirt and effectively removes insects. Used together with a foam sprayer with a dosage of 1:1 for best results. Can also be used as a car shampoo, then with a dosage of 1:100 in a washing bucket to hand sponge the vehicle.
pH value: 12.4 (concentrate).

Step drill suitable for drilling in ferrous and non-ferrous metal sheets, profiles and pipes, e.g. in copper, brass, aluminium, stainless steel and plastic. In specially manufactured steel with oxide coating. Specially developed tip and step geometry reduce the risk of snagging at high speeds. Laser etched size guide. Each step is made to etch and sharpen automatically. Produces even holes and drills plastic without splitting or cracking. Mount with 3 flat secure grips to prevent the step drill from slipping in the chuck and ensure maximum torque transfer. Optimal for use with battery-powered drill drivers. Maximum material thickness 4 mm. For best service life, the use of coolant is recommended.

(HTML text not available)

Easy-to-handle and flexible high-pressure washer. Air-cooled, 2-pole three-phase motor with pressure switch control and pump technology that provides high efficiency and cleaning performance. Three-cylinder axial piston pump that provides low flow and pressure losses. Top cover in high quality brass. Easily accessible water filter that protects the pump from dirt particles. Automatic start and stop. Designed for vertical and horizontal operation. Remotely operated and automatic, built-in hose reel with 15 m high-pressure hose. EASY!Force high-pressure coil handle. EASY!Lock quick couplings that enable quick handling. Automatic pressure relief to protect components and extend their life. Handles that are easily handled with the push of a button, for easy storage. Integrated storage of accessories.
Standard equipment: EASY!Force flush handle, flush tube 840 mm, 15 m Flex high-pressure hose on coil, Power nozzle and Roto Jet flush tube.

Compact battery-powered hot air gun 18 V Li-Ion that gives a maximum temperature of 470°C. Reaches operating temperature in six seconds so the user can quickly complete the work task. Electronic overload protection in tool and battery. Individual cell monitoring optimizes the tool and ensures long operating time and durability. Protection on the nozzle that prevents heat damage when it is put aside. Integrated suspension hook. LED lighting. Flexible battery system, fits all Milwaukee M18 batteries.
Standard equipment: 2 nozzles.
Delivered without battery and charger.

Comfortable safety shoe with aluminum toe cap and steel spike protection. ProNose toe wear protection made of PU. Upper material of PU-coated leather with Cordura. Water repellent. Bellows tongue and padded shaft edge. Lining material of Polyamide. Ergothan shock absorption system. Heat resistant and oil resistant outsole with extremely good grip. Midsole in PU and outsole in nitrile. Ventilating insole FX2 Supreme made of textile, soft E.V.A, electrically conductive polyester thread, merino wool, double shock absorption zones in Poron XRD. Roomy fit. Boa lacing. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI, HI)
IEC 61340-5-1 - ESD

Battery powered straight sander 12 V Li-Ion with carbon brushless motor that delivers more power compared to pneumatic counterparts. Compact design, only 262 mm long, which makes it easier to access in tight spaces. 3-position speed control and responsive variable speed trigger provide excellent control. Can be used with discs up to Ø 50 mm. Flexible battery system, fits all Milwaukee M12 batteries.
Standard equipment: 1 pc 2.0 Ah Li-Ion battery, 1 pc 4.0 Ah Li-Ion battery, battery charger, collet 6.0 mm and 8.0 mm and fabric storage bag.

Efficient hot water washing with pressure-controlled relief system and hose reel. Automatic start/stop function. Equipped with steam operation up to 150°C. Built-in diagnostic system. Service indicator. Optimal mobility. Highly efficient 4-pole motor. Boiler with EcoMode function. Ceramic pistons. Brass top piece. Practical control panel. Large water inlet filter. 4 large wheels. Robust wheel brake. Easy to transport, can be easily pushed/pulled over uneven surfaces. Storage box. 
Standard equipment: High pressure hose 15 m on hose reel, Ergo 2000 flush handle with swivel, Ergo coupling, brass water inlet coupling, Tornado Plus flush pipe, Tornado Plus nozzle and water inlet filter.

Earmuff with headband and rechargeable Li-Ion battery that is charged via solar cells. Solar cell film from PowerFoyle, integrated in the headband, converts both artificial light and natural sunlight into pure electrical energy. Bluetooth technology for connecting to two external Bluetooth devices, via Bluetooth MultiPoint Technology, which enables hands-free calls and streaming. Level-dependent listening function makes it possible to hear ambient sounds and increases situational awareness. Noise-reducing boom microphone, provides clear voice transmission in noisy environments. WAP (Work Audio Profiles) offers a new way to adjust audio settings to suit the work environment to promote situational awareness in different conditions. Supports OTA (Over-the-air) firmware updates to extend product life. The push-to-list (press-to-listen function), hear sounds in the environment better with a simple push of a button. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Also equipped with multifunction button (choose from predefined functions). Battery life of up to 78 hours. The earcup can also be charged with a USB-C cable. The headset automatically turns off after four hours of inactivity to save battery. Interchangeable hygiene kits and covers. Attenuation value SNR 31.5 dB. 
Conforms to EN 352-1:2020

Verktygssats TengTools TKW26R335F är en verktygssats med 335 delar i en 26" verktygsvagn med tredelad stomme av högkvalitativt stål. Behandlat med fosfatfritt rostskydd (5-stegsbehandling) och pulverlackerad yta. Verktygsvagn med sju lådor, var och en med 3-stegs kullagrade skenor och en kapacitet på 30 kg. Innehåller vanliga mekaniska verktyg, organiserade i moduler av EVA-skum där de är lätta att hitta. Försedd med extrahål för anpassning av tillbehör, länkhjul (5") och kombinationslås med tre siffror. TengTools Tool Control System i EVA-skum med hög densitet.

Egenskaper

• Antal delar: 335.0 (st)
• Art Nummer EAN: 5020385215573
• Art Nummer MPN(s): TKW26R335F
• Art Nummer UNSPSC: 27113201
• Benämning: VERKTYGSSET 335 DELAR TENG TOOLS RÖD 26 TUM FOAM
• ETIM-klasskod: EC000149
• Varumärke: TENGTOOL
• Vikt: 95.0 (kg)
• Vikt Brutto: 107,105
• Vikt Netto: 107,105

Flexible and powerful dry and wet vacuum cleaner with two motors. Developed to cope with the most demanding industrial tasks with the collection of dirt, liquids and fine dust. Semi-automatic filter cleaning system Push & Clean. 70 liter stainless tipping container mounted in a steel chassis. SoftStart system. Washable PET nano-fiber filter element with minimum 99.9% filtration rate. Perfect for wet vacuuming with a reliable float. Antistatic container. Practical accessory holder and tool tray. MultiFit accessory system.
Standard equipment: 4 m suction hose Ø 38 mm, 2 stainless steel suction tubes, stainless steel elbow, joint nozzle, floor nozzle 400 mm made of plastic, washable PET-Nano filter element M class and fleece filter bag.

Fast charger that can charge two M18 batteries at the same time. Up to 6x faster charging to 80% for increased productivity. 15 minutes super charge of M18 Forge 6.0 Ah to 80%. Charge distribution provides the ability to charge multiple batteries simultaneously to maximize productivity. Redlink electronics, the charger communicates with the battery and ensures optimal performance and extended life. Improved operating cycles thanks to active cooling and faster charging time with Cool-Cycle. Attachment on the back for versatile use. Compatible with all M18 batteries.

Miter saw with two-sided tilt option and variable speed to be able to cut different materials. SDS-System for quick and easy saw blade replacement. Two-point vacuuming for healthier work and a clean workplace.
Standard equipment: Saw blade Expert for wood and material clamp.

Compact silenced electrical unit. Robustly constructed. The sine curve is very good. Provides high quality power, can therefore operate sensitive measuring instruments and computers without problems. Quiet and economical operation. It is also possible to connect two power plants in parallel for double capacity.

Robust work lighting with stand. Powered by 1 pc Milwaukee 18 V Li-Ion battery or with mains cable. LED lighting with 3 impact-resistant and adjustable lamp heads that can rotate 180° vertically and 240° horizontally. Provides up to 6000 lumens. Up to 10 hours of operating time (with 8.0 Ah battery). Compact tripod with a low center of gravity, which can be adjusted in height from 1 m to over 2.2 m. Shock-resistant and reinforced legs. Long carrying handle. Low power indicator. Built-in M18 battery charger and 2.1 AMP USB output for charging USB devices. Protection class IP34, protected from dust and splashing water.
Standard equipment: Mains cable.
Supplied without battery, charger and storage bag.

Powerful and efficient 125 mm angle grinder 18 V Li-Ion with carbon brushless motor. With variable speed, soft start and engine brake. Narrow grip perimeter for better ergonomics. Vibration dampened support handle that can be placed in three different positions. Blast protection with tool-free adjustment and installation, rotatable 360°. Kick-back function and restart protection provide safer handling. Automatic shutdown if the machine is dropped and falls to the ground. Improved construction with better durability against dust and moisture.
Standard equipment: Support handle and stackable storage bag.
Supplied without battery and charger.

Drawer unit with three pull-out drawers. Made of impact-resistant polymer with metal-reinforced corners for best durability. Provides easy access to tools, even when placed at the bottom of the Packout stack. Ball-bearing boxes that can handle up to 11 kg in weight per box. Safety bars prevent unwanted opening of drawers during transport and make it possible to lock the drawers with a padlock. Each box with removable dividers for easy customization of storage compartments. Max load capacity 22 kg. Included in Milwaukee's Packout modular storage system.

Compact combi scrubber with 12 V battery operation, for daily cleaning of smaller areas. Very useful when cleaning in tight spaces. Powerful brush motor with high reliability. Equipped with rotating brush decks that allow the machine to scrub and dry in all directions. 27 kg brush pressure for efficient scrubbing. Work capacity of up to 1480 m²/h. Cutting width 370 mm. 11 liter clean and dirty water tank that is easy to empty and fill. Built-in charger. Automatic stop of brush wheel. Automatic water shut-off. Roll protection on suction cup sides. Battery indicator.
Standard equipment: Battery 12 V 55 Ah, built-in charger 12 V, polypropylene brush wheel Ø 370 mm and suction foot kit PU rubber.

Cable reel with 4 230 V sockets. Fixed center that prevents inserted connection cables from spinning when rolling out or in the cable on the ceiling. Pipe stand and drum in impact-resistant Polyamide. Self-closing lid. With fitted rubber cable. Overheat protection. 16 A/230 V.
Max load refers to rolled in/unrolled.
Approved for outdoor use. IP44.

Portable 1-phase induction heater. Water cooled. For easy handling in service vehicles and where you need to move it often. Heats a surface of 7x12x4 mm to 1000°C in 1 second. Equipped with 4 m connection cable, 1.8 m induction cable and built-in cooling tank.

Concentrate sprayer in high quality and powerful design. Made of special plastic and white seals. The special hand pump has an overflow valve to prevent over-pumping the container. Angle nozzle for easy handling and easy access. Concentrate spray Withstands most agents, but not chlorine, sulfuric acid or hydrochloric acid.

Combi package 18 V Li-Ion PowerPack. 
Contents: 
M18 BLDDRC Drill driver (carbon brushless). 
M18 BLIDRC Impact driver (carbon brushless). 
M18 FCS552 Circular saw (carbon brushless). 
M18 FBJS FUEL Jigsaw (carbon brushless). 
M18 FMT FUEL Multitool (carbon brushless). 
2 pc 5.0 Ah batteries, fast charger and soft storage bag.

32-piece Shockwave set with 25 mm long bits and bit holder with quick chuck. Bits with Shock Zone that reduces stress at the tip, resulting in fewer breakages. Absorbs impact and allows the bit to flex like a spring.

Luft, 20 bar Slangvinda försedd med ställbar utmatningsarm. Vindan är pulverlackerad och utrustad med returfjäder. Kan kompletteras med svängbart väggfäste om slangen skall dras ut eller matas in i sidled. Slitaget på vindan blir mindre och slangen rullas upp jämnare. Oljebeständig gummislang.

Specifikationer

Hørselsvern med hodebøyle og innebygd Li-Ion batteri. Utstyrt med FM-radio med RDS. Bluetooth 5.2-teknologi for tilkobling til to eksterne Bluetooth-enheter, via Bluetooth MultiPoint Technology, som muliggjør handsfree-samtaler og streaming. Nivåavhengig medlyttingsfunksjon gjør det mulig å høre omgivelseslyder og øker situasjonsbevisstheten. Push-to-listen (trykk-for-å-lytte-funksjon), hør lyder i omgivelsene bedre gjennom et enkelt knappetrykk. Støyreduserende bommikrofon, gir tydelig taleoverføring i støyende miljøer. Støtter OTA (Over-the-air) oppdateringer av den innebygde programvaren for å forlenge produktens levetid. Støtter Qualcomm aptX HD for ekstra god lydoverføring via Bluetooth. Applikasjonen 3M Connected Equipment gjør det mulig å navigere via appen i headsetets meny og gjøre alle konfigurasjoner på en enkel og rask måte. Appen tilbyr også rask tilgang til brukerinstruksjoner, FAQ og tekniske datablad. Appen lastes ned til telefonen fra App Store eller Google Play. Hørselsvernets funksjoner kan også styres fra knappene på hørselsvernet. Stemmeguidet menysystem. Batteritid på opptil 78 timer. Hørselsvernet lades via USB-C-kontakt (USB-C ladekabel er ikke inkludert). Headsettet slås av automatisk etter fire timers inaktivitet for å spare batteri. Delvis laget av resirkulert plast. Utskiftbare hygienesett og kåpeskall. Dempingsverdi SNR 31 dB.
Godkjent/sertifisert i henhold til: 
EN 352-1:2020

Cut protection glove with cut protection level B. A light and flexible glove with a reinforced thumb that provides a good grip. With touchscreen function. Made of 18gg HPPE blended liner, 35% plyumerized PU, 23% HPPE, 28% Nylon, 10% metal fiber and 4% spandex.

Approved/Certified according to:
CE category 2
OEKO-TEX
EN ISO 21420:2020
EN 388:2016+A1:2018 4X41B

Powerful and efficient 1-phase industrial vacuum cleaner with dual motors. Intended for suction of dry material. The vacuum cleaner is approved for health-hazardous H-classified dust and microscopic particles. Equipped with the Longopac bag system, which is optimal for hazardous dust and safe removal of the collected material. The material is collected directly in endless polyethylene bags, which can be closed and disposed of. The cleaning is handled safely and without the employee coming into contact with the collected material. Manual filter cleaning. Vacuum gauge on top of engine. Large filter surface. With swivel wheels and handles for easy and safe movement. Equipped with 5 m antistatic hose and antistatic accessories.
Standard equipment: 5 m suction hose Ø 40 mm, reducer Ø 50/40 mm, pipe bend in metal Ø 40 mm, S pipe in metal Ø 40 mm, floor nozzle 400 mm, round brush, flat metal joint nozzle Ø 40 mm, conical rubber joint nozzle Ø 40 mm, HEPA exhaust filter, M-class filter with glued seams, 1 carton with Longopac bags 4x 22 m.

Li-Ion High Output battery with extra long operating time. Provides up to 25% more power compared to M12 RedLithium-Ion batteries. Digital overload protection. Individual cell monitoring. Durable and shock-resistant construction. Can be used in temperatures down to -20°C without affecting operating time or battery life. Water-protected battery that transports the water away from the electronics and out of the battery. Compatible with all Milwaukee M12 tools.

Powerful lubrication and grease sprayer 18 V Li-Ion for 400 ml cartridge or grease in bulk. Gives a working pressure of 690 bar. Empty up to 7 cartridges per charge. Flexible high-pressure hose with spring protection and coupling. Overload protection in both tool and battery. Battery indicator. LED lighting. Bleeding valve for fast flow. 
Standard equipment: High pressure hose with spring protection and coupling.
Supplied without battery and charger.

Compact and powerful drill driver 18 V Li-Ion with strong and efficient carbon brushless motor. Same compact size and weight as a 12 V machine. Maximum torque of 55 Nm and drilling capacity in wood of 36 mm. 22 torque settings. Ergonomic grip. 2-speed with stepless right/left gear with constant power. Overload protection. Engine brake. 13 mm quick chuck. LED lighting. Flexible battery system, fits all Hikoki 18 V and MultiVolt batteries.
Standard equipment: 2 pcs 5.0 Ah Li-Ion batteries, battery charger and stackable storage bag.

Combo pack 18 V Li-Ion M18 Fuel PowerPack. 
Contents: 
M18 FPD3 Impact drill driver 
M18 FMTIW2F12 b> Nut driver with friction ring 
2 pcs 5.0 Ah Li-Ion batteries, charger and 2 pcs stackable HD boxes.

Efficient hedge trimmer 18 V Li-Ion with carbon brushless motor. Double-sharpened blade cuts more material per swipe. 60 cm blade that trims more material in one sweep with enough power to cut 20 mm thick branches. Maintains power under load without binding. Fully metal gearbox protects the drive system from damage. Blade tip guards protect and prevent accidental damage to fences or other objects. The handle's location and weight distribution provide the best combination of balance and control. Flexible battery system, fits all Milwaukee M18 batteries. 
Standard equipment: Sword guard. 
Supplied without battery, charger and storage bag.

Earmuff with headband. Equipped with noise-canceling microphone, Bluetooth technology and microphones for listening function. Bluetooth version 4.2, for connection to an external device for hands-free calls and streaming. Level-dependent function via microphones makes it possible to hear ambient sounds and pay attention to what is happening in the surroundings. Built-in FM radio with digital channel search and memory to store radio stations. Push-To-Listen function, the volume of the Bluetooth-connected device decreases and the possibility of hearing ambient sounds increases. Large buttons and voice-controlled menus for easy handling. Auto-pairing for easy connection to phone. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Battery life of up to 78 hours. Automatic shutdown after 4 hours of non-use to save battery. Low battery warning. Exchangeable covers in different colors are available as accessories. Attenuation value SNR 30 dB. Supplied with 2 x 1.5 V AA batteries, can also be used with rechargeable batteries.
Conforms to EN 352-1:2020

Compact, light and transportable miter saw with high cutting capacity. Suitable for cutting and sawing in materials such as aluminum and wood. Laser marker for easy and precise cutting. Adjustable extra supports for the material on the sides. Swivel plate 45° left and right. Vibration-damped rubber-coated handle/grip. Practical sliding rail allows the saw to be placed next to the wall. Spindle lock for easy and safe replacement of the saw blade. Effective dust collection and possibility of connecting a vacuum cleaner.
Standard equipment: Saw blade, dust bag, vise and key.

Craftsman stand in load class 3 with a smaller format for work at a slightly lower height. Platform height of 1.1 m with working height of 3.1 m. Can be used indoors and on firm, smooth ground outdoors. Easy to transport and assemble. Consists of 1 foldable frame section made of aluminium, 1 platform (1400x600 mm) of non-slip plywood, with hatch and stable aluminum frame and 4 lockable nylon wheels Ø 125 mm. Adjustable legs are available as accessories for safe positioning in case of level differences. Can be built up to a maximum platform height of 4.2 m in combination. 
The combination A+R gives a platform height of 1.4 m (working height 3.4 m). 
The combination A+B gives a platform height of 2.4 m (working height 4.4 m). 
The combination A+B+C-XR gives a platform height of 4.2 m (working height 6.2 m). 

Approved/Certified according to: 
EN 1004 (European standard) 
AFS 2013:4

Light and flexible starting aid Lithium-Ion, which provides 1000 A. Patented safety technology (Ultrasafe) which provides a spark-protected connection, prevents incorrect connection of the battery poles and protects against overcharging and heat. Simple and safe to use. Can also be used as a power source for all devices with 12 V or USB charging. Designed for standard vehicle, light truck, or boat. Recommended for engines up to 6.0 l (petrol) and 3.0 l (diesel). Starts vehicles up to 20 times on one charge with built-in Li-Ion battery. Charged via included USB cable. Mains adapter not included.

Drill set in 19 parts. Twist drills 1.0-10.0 mm, in intervals of 0.5 mm. Plastic storage box with snap lock.
Material: HSS/M2.
Surface treatment: TIN coated
Track design: Right normal spiral.
Tip angle: 118°
Area of ??use: For normal drilling work.
Dimensions according to DIN 338

Robust laser-cut garage jack with lifting capacity of 2 tons. Low model with double pump and foot pedal for quick lifting. T-handle, length 1100 mm. Nylon wheels and rubber saddle cover. Equipped with accessory compartment. Weight: 40.75 kg.