Battery charger and battery support unit for both 12 and 24 V vehicle batteries. With 8-step fully automatic charging cycle. Works for all types of lead acid batteries, 12V, 24V, WET, MF, Ca/Ca, AGM and GEL. Suitable for universal use in workshops and showrooms. Safe, easy-to-use battery charger for fast charging. Designed to protect car electronics, spark proof, polarity protected and short circuit proof. Fits as well as battery support unit and offers selectable voltage setting modes to avoid ECU damage caused by voltage fluctuations during programming. Display showing the progress of the charge. Provides clear information on important charging parameters such as current, voltage and amperes. Up to 40 A (12 V) and 20 A (24 V) battery support. Power supply with selectable output in steps of 0.4 V (12 V) or 0.8 V (24 V). Fast, fully automatic 8-step charging. Dedicated programs for normal batteries, AGM batteries and Ca/Ca batteries. Boost program to recondition deeply discharged lead acid batteries. Low 2 V starting voltage for charging. Automatic parallel load compensation. Extremely low ripple. Automatic temperature compensation. Supplied with 2.5m charging cables and detachable clips.

Battery charger with starting aid, suitable for vehicles with medium-sized petrol or diesel engines.

Stainless concentrate sprayer on wheels. With compressed air filling. Supplied with 3 m spiral hose, complete chemical gun with handle, pipe and flat jet nozzle. Withstands most agents, but not chlorine, sulfuric acid or hydrochloric acid. Substances within the acidity range PH value < 5 as well as solvents and strongly corrosive substances must not be filled in the container.

Interior cleaner for interior cleaning of cars, buses, trucks, boats, etc. Quickly and effectively dissolves ingrained dirt on rubber, plastic, vinyl, textile, etc. Leaves a completely grease-free and clean surface. Easy to apply.
pH concentrate: 10.5.
Dosage: 100%.

Combo pack 18 V Li-Ion Fuel PowerPack.
Contents:
M18 CBLDD Drill driver (carbon brushless).
M18 CBLID Impact screwdriver (carbon brushless).
M18 CCS55 Circular saw (carbon brushless).
M18 FBJS Jigsaw (carbon brushless).
M18 BMT Multimachine.
2 pcs 5.0 Ah batteries, charger and soft storage bag.

Compact 3 ton jack with twin pistons that allows maximum height to be reached with seven pumps. The entrance height is 130 mm and a maximum height of 462 mm. With nylon wheels. Dust cover ensures that pistons and spring are not damaged. Rubber saddle that protects the vehicle and reduces the risk of it sliding off. Foam plastic on the handle protects the vehicle body. Equipped with safety valve and system for controlled immersion speed. 
CE-certified according to 2006/42/EC + SS-EN 1494.

Concentrate sprayer in high quality and powerful design. Made of special plastic and white seals. The special hand pump has an overflow valve to prevent over-pumping the container. Angle nozzle for easy handling and easy access. Concentrate spray Withstands most agents, but not chlorine, sulfuric acid or hydrochloric acid.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Equipped with a chimney to be able to lead the exhaust gases away and out. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

(HTML text not available)

Assembly glove made of Nylon/Lycra mixture and nitrile reinforced in the palm. Engineered to provide ultimate durability and all-day comfort, ideal for material handling or light construction work. Designed to provide dexterity when handling small objects. Smartswipe material on palm and fingertips, for easy use of touchscreen devices with the gloves. 12-pack.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 4121A

Teleskopisk med clips.

Attribut

• Kapacitet Kg: 3.6
• Längd mm: 170 - 762

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Equipped with a chimney to be able to lead the exhaust gases away and out. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

Premium fordonsschampo.Används som ett vanligt schampo och ger en vattenavvisande yta.Premiumschampo.

• Hudnära pH

• Glanshöjande effekt

• Vattenavstötande

Egenskaper

Volym: 500ml

Produkttyp: Schampo med skydd

Ursprungsland: SE

Tullkod: 34029090

Round brush 32 mm. Fits Nilfisk vacuum cleaners GD 930, VP 930 and UZ 964.

Storage box with interior of 10 removable and mountable compartments that can be used for the most common accessories in the workplace. Constructed from impact-resistant polymers for long-lasting durability. IP65 sealed to keep out rain and work dust. The lid seals the compartments and prevents the contents from shifting during transport. Included in Milwaukee's Packout modular storage system.

Charger and battery pack with 2 pcs 12 V 4.0 Ah Li-Ion batteries and charger.

Efficient jigsaw 12 V Li-Ion with carbon brushless motor. Saws up to 24 m in 19 mm OSB board with 4.0 Ah M12 battery. Tool-free Fixtec blade attachment for easy and quick blade changes. Tiltable table 0-45°. Pendulum function in four stages provides fast cutting in wood. Built-in exhaust that keeps the line of sight clear. LED lighting. Flexible battery system, fits all Milwaukee M12 batteries.
Supplied without battery, charger and storage bag.

3-phase hot water washer in the middle class that is suitable for the slightly more demanding cleaning tasks for 4-6 hours per day. Excellent performance for general hot water cleaning and is equipped with efficient EcoPower boiler EcoMode function. Highly efficient 4-pole motor. Brass top piece. NA5 pump with three powerful ceramic pistons. Large inlet water filter that protects the pump against impurities. Flow controlled unloading system. Safety function that warns of low fuel level. Built-in diagnostics system. Service and maintenance is quick and easy, as all important parts are easy to access and inspect. 4 large wheels and a well-balanced center of gravity make it easy to transport, can be easily pushed/pulled over uneven surfaces. Accessory storage with double flush tube holder, swiveling cable hook for easy handling of power cable. Innovative holder for the flush handle. Supplied with 10 l chemical tank as standard and with space for an extra tank.
Standard equipment: High pressure hose 15 m on hose reel, Ergo 2000 Standard flush handle, Ergo coupling set, universal brass coupling int. thread 3/4", BA valve incl. Gardena fittings, Tornado Plus flush pipe, Tornado Plus nozzle, 10 l chemical tank and water inlet filter.

Kompakt mutterdragare med dubbla hastighetslägen med högpresterande motor, extra kraftigt vridmoment på 1356Nm och lossningsmoment 2200Nm. Chassi i kompositmaterial för låg vikt och bra isolering. Kraftig Twin Hammer slagmekanism i hammarhus av stål. Justerbart arbetsmoment vid åtdragning och alltid full effekt vid lossdragning. Fram/back reglage som enkelt regleras med en hand.

Attribut

• Max. ljudnivå dBA: 99,7
• Max. vridmoment Nm: 1356
• Vibrationer m/s2: 8,6
• Varv rpm: 8300
• Längd mm: 150
• Vikt g: 1600
• Luftanslutning: NPT 1/4" invändig
• Luftförbrukning l/m: 150

Small and compact safety-class dry and wet vacuum cleaner with ergonomic design. Suitable for all tasks involving the collection of hazardous dust in class H, in industry, construction and the like. Semi-automatic filter cleaning system Push & Clean. Bladder function. Container of 20 l made of impact-resistant plastic. Lifting handle on container. Conveniently located hose connection. Strong snap locks. Smart click system for fast changing of accessories. Accessory and cable holder. Two swivel wheels and two large rear wheels. Low noise level.
Standard equipment: 1.9 m suction hose with pipe bend Ø 32 mm, 2 pcs chrome-plated steel suction pipe, floor nozzle, joint nozzle, furniture nozzle, brush nozzle, H-Class PTFE fleece filter and filter bag.

Light and flexible starting aid with built-in Li-Ion battery, which provides 400 A. Patented safety technology (Ultrasafe) which provides a spark-protected connection, prevents incorrect connection of the battery poles and protects against overcharging and heat. Simple and safe to use. Recommended for gasoline engines up to 4.0L, such as cars, boats, motorcycles, off-road vehicles, snowmobiles, jet skis, lawn mowers, etc. Can also be used as a power source for any device with USB charging. Built-in LED lighting. Starts vehicles up to 20 times on one charge. Charged via included USB cable. Mains adapter not included.

Comfortable safety shoe with aluminum toe cap and steel spike protection. ProNose toe wear protection made of PU. Upper material of PU-coated leather with Cordura. Water repellent. Bellows tongue and padded shaft edge. Lining material of Polyamide. Ergothan shock absorption system. Heat resistant and oil resistant outsole with extremely good grip. Midsole in PU and outsole in nitrile. Ventilating insole FX2 Supreme made of textile, soft E.V.A, electrically conductive polyester thread, merino wool, double shock absorption zones in Poron XRD. Roomy fit. Boa lacing. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI, HI)
IEC 61340-5-1 - ESD

1-component, flexible all-round joint, adhesive and sealant. Has a wide range of applications and good adhesion to many substrates. For application inside and outside buildings such as floors, walls, doors, windows, ceilings, wet rooms, kitchens, laundries, leisure boats, etc. Can be painted over. Frost resistant. Movement capacity ± 20%. Strong and durable. Good mechanical resistance. Absorbs vibrations. High bond strength. Sticks to damp surfaces. Cures under water. Resistant to salt water, diluted alkalis and acids. Solvent-free. Tin free. Isocyanate free. Phthalate free. Low emission, promotes good indoor air quality. Approved for use on surfaces intended for food (ISEGA) and in wet rooms.
Working temperature: +5°C to +40°C.
Temperature resistance: - 50°C to +90°C.

Däckomläggare med tiltbart torn, utrustad med hjälparmar och luftpåfyllning via pedal. Variabel hastighet.

Egenskaper

Teknisk information

Hjälparmar: Ja
Centrumlåsning: Nej
Chockluft: Nej
Invändigklämkapacitet: 12" - 26,5"
Utvändigklämkapacitet: 10"- 24"
Max fälgbredd: 15" (381 mm)
Max hjuldiameter: 41" (1050 mm)
Mått: (B x H x D) 1885 x 2016 x 1556 mm
Strömförsörjning: 230V (1fas)
Arbetstryck: 8 - 10 bar
Elmotor: 1,5 Kw (1fas)

Ursprungsland: IT

Tullkod: 90311000

Grass trimmer 18 V Li-Ion with brushless Powerstate motor. Strong enough to clear heavy weeds, reaches full speed in under a second. Stepless speed regulation in two fixed positions gives the option of choosing between power and operating time. Up to 1 hour of operating time with an M18 High Output 8.0 Ah battery. Adjustable trimming radius of between 35 and 40 cm. Easy to fill thread. Extra handle for good ergonomics and control. Flexible battery system. Fits all Milwaukee M18 batteries.
Standard equipment: 1 pc steel stick, 1 pc T30 torx key and 1 pc trimmer wire.
Supplied without batteries, charger and storage bag.

Compact combi scrubber with 12 V battery operation, for daily cleaning of smaller areas. Very useful when cleaning in tight spaces. Powerful brush motor with high reliability. Equipped with rotating brush decks that allow the machine to scrub and dry in all directions. 27 kg brush pressure for efficient scrubbing. Work capacity of up to 1480 m²/h. Cutting width 370 mm. 11 liter clean and dirty water tank that is easy to empty and fill. Built-in charger. Automatic stop of brush wheel. Automatic water shut-off. Roll protection on suction cup sides. Battery indicator.
Standard equipment: Battery 12 V 55 Ah, built-in charger 12 V, polypropylene brush wheel Ø 370 mm and suction foot kit PU rubber.

Reliable high-quality forklift truck. Strong hydraulics. Bogie wheels made of polyurethane with a small climbing wheel at the front to easily get under the pallet from the long side.

Versatile syringe with container made of high-quality plastic. With white seals.

Light and flexible gasoline-powered power plant with an efficient Honda engine. Equipped with oil level monitor. Protection class IP23. With 2 sockets 1-phase Chucko 10 A.

Robust electric unit that is noise-reduced and quiet. Very good sine curve. High quality of the current, runs sensitive measuring instruments and computers without problems. Quiet and economical operation. Can be connected in parallel for double effect.

Powerful metal circular saw 18 V Li-Ion with brushless Powerstate motor. 150 mm saw blade with a maximum cutting depth of 57 mm. Tool-free depth adjustment and lowering lever. Advanced electronic protection against overload, overheating and discharge. Double switch prevents accidental start. Lightweight and compact design. Storing the Allen key on the machine. Integrated hook for hanging. LED lighting. Flexible battery system, fits all Milwaukee M18 batteries. 
Standard equipment: 150 mm metal blade and Allen key. 
Supplied without battery, charger and storage bag.

Dehumidifier for use in all drying tasks in the construction industry and public environment, etc. Equipped with large wheels and a strong running bar. Released water is collected in a built-in 12 liter water tank with overflow protection or is led directly to the drain with a hose, connection 1/4" internal thread. Equipped with an hour counter. Robust construction for professional use. NOTE: Drain hose not included.

Combo pack 18 V Li-Ion M18 Fuel PowerPack. 
Contents: 
M18 FDD3 Drill driver 
M18 FMTIW2F12 b> Nut driver with friction ring 
M18 FSAG125X Angle grinder 
3 pcs 5.0 Ah Li-Ion batteries, fast charger and storage bag.

Optional with or without switchable start boost. For larger power tools, compressors, milling machines or table circular saws. Electric motors, electric welding. The operating time is a maximum of 4 hours. Automatic shutdown in the event of a lack of oil. A CEE 16 A 3-phase socket. Two grounded sockets. Design with a junction box on the generator.

Protective helmet equipped with MIPS protection system for increased protection for the brain.
MIPS Brain Protection System, is a low friction layer designed to reduce rotational forces transmitted to the brain during impact. The system allows for a multi-directional movement of 10-15mm in certain angled impacts such as falling objects, tripping and hitting objects. The technology is based on many studies of the biomechanical properties of the human brain, MIPS mimics the brain's own protective system.
Also equipped with twICEme, a digital dimension of extra security. A digital NFC device in the helmet enables the user to upload their personal and vital information. In the event of an accident, an NFC-enabled smartphone is placed on the twICEme symbol on the helmet, for immediate access to information about the injured person such as allergies, trial information, diseases, medications, contact information of relatives, etc. The user decides the information that is stored.< br>Helmet with ergonomic design, comfort and fit. 360° fit adjustment with micrometric adjustment wheel that guarantees safe and tight use. 4-point chinstrap with plastic buckle designed with quick and easy adjustment functions. Ventilation that contributes with refreshing air flow around the head. Replaceable comfort padding. Outer shell made of ABS which is resistant to penetration and fire. Inner shell in Multi-impact EPP that does not compress permanently on impact. Optimized for accessories such as visors, equipped with strong external lamp holders compatible with all headlamps with elastic bands and integrated openings for helmet-mounted hearing protection. Supplied in a storage bag that protects against damage and scratches.
Materials: Inner shell in combination of EPS and EPP, outer shell in ABS
Weight: 450 g .
Size: 53-63 cm.

Approved/Certified according to:
EN 397:2012+A1:2012 (industrial helmet standard)

Flush handle with KEW quick coupler to connect high pressure accessories. With swirl. Max working pressure 310 bar. Maximum temperature 150°C. Water quantity 45 l/min. Connection thread 3/8" inside.

32-piece Shockwave set with 25 mm long bits and bit holder with quick chuck. Bits with Shock Zone that reduces stress at the tip, resulting in fewer breakages. Absorbs impact and allows the bit to flex like a spring.

Grease gun for 400 g tube or loose grease. One-handed model with heavy cast iron head and precision piston. Supplied with 300 mm lubrication hose and 4-back nozzle.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Equipped with a chimney to be able to lead the exhaust gases away and out. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

(HTML text not available)