32-piece Shockwave set with 25 mm long bits and bit holder with quick chuck. Bits with Shock Zone that reduces stress at the tip, resulting in fewer breakages. Absorbs impact and allows the bit to flex like a spring.

Dispenser som inneholder to størrelser av Cederroth Soft Foam Bandage Blå, 3 cm og 6 cm brede. Med integrert skjærekniv for enkel bruk med tydelige instruksjoner. Kompakt størrelse som gjør den enkel å montere på veggen, selv på små flater. Dispenseren er låst for å forhindre svinn, og åpnes enkelt med refillnøkkel. En gjennomsiktig luke beskytter produktene mot støv og smuss. Vinduer på sidene gjør det enkelt å se når påfylling trengs.
Mål: 445x165x300 mm
Innhold: 
1 stk Cederroth Soft Foam Bandage Blå 3 cm x 4,5 m 51011022 
1 stk Cederroth Soft Foam Bandage Blå 6 cm x 4,5 m 51011010

Extremely quiet diesel heater that works with IR radiation instead of a fan that lets the air circulate. The IR radiation that the device generates heats materials, not air. The infrared heat is distributed evenly in all directions and is pleasant even when staying near the heater. Triple combustion of the fuel which minimizes the emissions of smoke and smell. With a working area of ??up to 110 m² and is suitable for halls, garages, tents, etc. Safe operation thanks to flame monitoring, overheating protection, short circuit protection. motor overheating protection, tipping protection, indoor temperature sensor and motor rotation detection. Timer for switching off 0-24 hours. Interval timer 5-60 minutes walking time + 5 min break in between. Equipped with soft-touch control panel with LED screen. Large diesel tank that provides an operating time of up to one day. Equipped with wheels for easy movement. Supplied with remote control for wireless setting of the temperature.

Combination package 18 V Li-Ion. 
Contents: 
DS 18DE Drill driver (carbon brushless). 
WH 18DE Impact screwdriver (carbon brushless). 
2 pcs 5.0 Ah Li-Ion MultiVolt batteries (BSL36A18), charger and stackable storage bag HSC3.

Fast charger that can charge two M18 batteries at the same time. Up to 6x faster charging to 80% for increased productivity. 15 minutes super charge of M18 Forge 6.0 Ah to 80%. Charge distribution provides the ability to charge multiple batteries simultaneously to maximize productivity. Redlink electronics, the charger communicates with the battery and ensures optimal performance and extended life. Improved operating cycles thanks to active cooling and faster charging time with Cool-Cycle. Attachment on the back for versatile use. Compatible with all M18 batteries.

Compact and ergonomic dry and wet vacuum cleaner with very high suction power. Push&Clean semi-automatic filter cleaning system. Power outlet for power tools and automatic start/stop function. Suction strength regulation. Soft start. Good storage of electric cable, accessories and tools. Antistatic container. Washable PET fleece filter element. The entire MultiFit accessory range fits. Low noise level.
Standard equipment: Suction hose (Ø32 mm, 2.5 m), 2 chrome extension tubes, floor nozzle, joint nozzle, washable PET fleece filter element, fleece filter bag and tool adapter.

Mist and air tool oil in spray form. Highly refined silicone-free so-called white oil where high demands are placed on a good working environment. Can be used for all types of air-powered tools and machines. Recommended for use down to -10°C.

Powerful tiger saw 18 V Li-Ion with brushless Powerstate motor. Redlink Plus electronics that ensure maximum performance and protect the tool against overload and overheating. Patented gear protection clutch, extends the life of gears and motor by absorbing large impact forces caused by sudden locking of the saw blade. Metal reinforced battery connection provides improved durability. Adjustable stop. FIXTEC blade attachment for quick and easy blade replacement. Flexible battery system, fits all Milwaukee M18 batteries. Integrated suspension hook. LED lighting. 
Supplied without battery, charger and storage bag.

Earmuff with headband and rechargeable Li-Ion battery that is charged via solar cells. Solar cell film from PowerFoyle, integrated in the headband, converts both artificial light and natural sunlight into pure electrical energy. Bluetooth technology for connecting to two external Bluetooth devices, via Bluetooth MultiPoint Technology, which enables hands-free calls and streaming. Level-dependent listening function makes it possible to hear ambient sounds and increases situational awareness. Noise-reducing boom microphone, provides clear voice transmission in noisy environments. WAP (Work Audio Profiles) offers a new way to adjust audio settings to suit the work environment to promote situational awareness in different conditions. Supports OTA (Over-the-air) firmware updates to extend product life. The push-to-list (press-to-listen function), hear sounds in the environment better with a simple push of a button. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Also equipped with multifunction button (choose from predefined functions). Battery life of up to 78 hours. The earcup can also be charged with a USB-C cable. The headset automatically turns off after four hours of inactivity to save battery. Interchangeable hygiene kits and covers. Attenuation value SNR 31.5 dB. 
Conforms to EN 352-1:2020

Set of three tool boxes, one with a handle and one with large wheels and a strong extension handle. Internal storage drawers. Metal reinforced corners. Metal reinforced locking point. Constructed of impact-resistant polymers. Mounting location for One-Key Tick. Dust and waterproof IP65. Included in Milwaukee's Packout modular storage system.

Baseline B20 direktdrivna kolvkompressorer. Avsedd för delvis yrkesmässig användning och för gör-det-självare. Den är lämplig för underhållsarbeten och snickerier (till exempel tryckluftsrengöring, pumpning av däck, drivning av spikpistol, punktblästring, enklare lackeringsarbeten etc.). Kan även användas för drivning av tryckluftsverktyg som borrmaskiner och mindre mutterdragare (ej längre användning). Enkel och smidig hantering.

Egenskaper

• Antal faser: 1-fas
• Arbetstryck, max: 8 (bar)
• Art Nummer EAN: 8020119147979
• Art Nummer FinFono: 7756908
• Art Nummer MPN(s): Pole Position B20 Baseline
• Art Nummer UNSPSC: 40151601
• Benämning: KOLVKOMPRESSOR ABAC BASELINE POLE POSITION B20 2HK 24L VER2
• Bredd: 332 (mm)
• Cylindertyp: Kolv
• Drivningstyp: Direktdriven
• ETIM-klasskod: EC002860
• Genomlupen cylindervolym: 190 (l/min)
• Höjd: 579 (mm)
• Kapslingsklass IP: IP20
• Ljudeffektnivå (LW): 97.0 (dB (A))
• Ljudtrycksnivå (Lp): 77 (dB (A))
• Längd: 558 (mm)
• Motoreffekt (W): 1,5 (kW)
• Motoreffekt (hk): 2.0 (hk)
• Motorspänning: 230 (V)
• Märkström: 7.0 (A)
• Oljesmörjning: Ja
• Rörlighet: Bärbar
• Steg: 1-steg
• Varumärke: ABAC
• Varvtal kompressorblock: 2850.0 (r/min)
• Vikt: 25.0 (kg)
• Vikt Brutto: 26
• Vikt Netto: 25
• Volym, luftbehållare: 24 (l)

Earmuff with headband. Equipped with noise-canceling microphone, Bluetooth technology and microphones for listening function. Bluetooth version 4.2, for connection to an external device for hands-free calls and streaming. Level-dependent function via microphones makes it possible to hear ambient sounds and pay attention to what is happening in the surroundings. Built-in FM radio with digital channel search and memory to store radio stations. Push-To-Listen function, the volume of the Bluetooth-connected device decreases and the possibility of hearing ambient sounds increases. Large buttons and voice-controlled menus for easy handling. Auto-pairing for easy connection to phone. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Battery life of up to 78 hours. Automatic shutdown after 4 hours of non-use to save battery. Low battery warning. Exchangeable covers in different colors are available as accessories. Attenuation value SNR 30 dB. Supplied with 2 x 1.5 V AA batteries, can also be used with rechargeable batteries.
Conforms to EN 352-1:2020

Belt sander with quiet and reliable 3-phase, 400 V induction motor. Tiltable sanding table. Ergonomic working height of 960 mm. Adjustable eye protection. Supplied with sanding stop and a zirconium-coated 60 grain sanding belt 75x2000 mm.

Momentnyckel TengTools Plus-serien med 1/4"-1"-fäste, snabblåsning och spärrmekanism med 72 tänder och vred för omställning, som uppfyller standarden DIN 3122. Klickmekanism som indikerar när förinställt åtdragningsmoment uppnås, vilket förhindrar åtdragning med övermoment. Individuellt certifierad noggrannhet (±4 %), vilket uppfyller standarden ISO 6789 gällande tillförlitlig åtdragning. Ergonomiskt handtag med momentskala (Nm) som är lätt att läsa av samt låsknapp för konsekvent inställt åtdragningsmoment. För åtdragning medurs.

Egenskaper

• Art Nummer EAN: 5020385033993
• Art Nummer MPN(s): 1492P015
• Art Nummer UNSPSC: 27111715
• Benämning: MOMENTNYCKEL TENG TOOLS PLUS 1/4 3-15NM
• Dimension tapp: 1/4 (tum)
• ETIM-klasskod: EC002132
• Gångriktning: ['Vänster', 'Höger']
• Konstruktion: Klick
• Kuggar: 72.0 (st)
• Längd: 190 (mm)
• Momentområde, max (metrisk): 15.0 (Nm)
• Momentområde, min (metrisk): 3.0 (Nm)
• Momentriktning: Höger
• Momenttyp: Signalerande
• Onoggrannhet: ±4 (%)
• Varumärke: TENGTOOL
• Vikt: 0.24 (kg)
• Vikt Brutto: 0,477
• Vikt Netto: 0,477

Key cabinet for wall mounting indoors and in protected places outdoors. Storage of e.g. keys or plastic code cards. 4-digit individually adjustable number combination. Stable housing made of metal.

Efficient jigsaw 18 V Li-Ion with brushless Powerstate motor. Advanced digital tool and battery overload protection. Double-sided power switch allows the user to turn the tool on and off regardless of position. Six speed settings with automatically controlled start mode. Fixtec saw blade attachment for quick and easy blade change. The saw foot is adjustable 0-45° without tools for miter sawing. Five-stage pendulum mechanism provides increased sawing performance. Exhaust keeps the saw line free of dust during use. Removable soft shoe to avoid marks and scratches when sawing in soft materials. Flexible battery system, fits all Milwaukee M18 batteries. LED lighting. 
Standard equipment: 1 pc saw blade, dust extraction adapter, dust cover, splinter protection and soft shoe. 
Supplied without battery, charger and storage bag.

Engineered for hard, intensive work. Hand-operated deadman trigger for safe control when lifting and lowering. Built-in safety valve against overload. Easy to maneuver. Low weight. Ergonomic handle provides a comfortable and safe grip in all conditions. Silent wheels on models up to 2 tons. Low minimum height. Wide and stable frame made of the highest quality steel. Equipped with pedal for quick lifting.

Charger and battery pack with 2 18 V 5.0 Ah Li-Ion batteries and charger. The charger is suitable for both the M12 and M18 series.

Hoodie in BCI cotton with full zip and lined hood with drawstring. Two side pockets with zippers, the right pocket is equipped with a D-ring on the inside. Inside pocket on the left side. Looped inside (French Terry). Wash at 60°C.
Materials: 80% cotton, 20% polyester, weight 320 g/m².

Approved/Certified according to:
OEKO-TEX 100

2-cylinder belt-driven compressor 3-phase, 400 V. 90 l air tank. The pulley on the compressor part has fan blades for good cooling. Low RPM. Protection class IP54. Equipped with wheels and handles for easy transport. The compressor is equipped with a pressure switch, manometer, safety valve, reduction valve and quick coupling. 3-phase glove not included.

Cold degreasing intended for engines, tools, vehicles, etc. Effective and self-acting, dissolves oil, grease, asphalt and tar. Leaves a rust-protective surface.
Dosage: 100%.

Superclamp II tillverkas av vattentålig kompositplast. Alla delar är lätta och mycket tåliga. Du får hög säkerhet utan en massa extra vikt. Det ergonomist utformade låshandtaget fäster snöskotern i ett steg. Du slipper sträcka dig över skärmen eller under skotern med spännband för att fästa skotern. För att skydda skidorna på din skoter är Superclamp II klädd med gummi. Och fästöglan som skruvas fast i släpgolvet hindrar eller stör inte vid lastning och lossning.

Egenskaper

Ursprungsland: SE

Tullkod: 87169090

Kompakt sats med 1/4" hylsor och bits samt 60-tänders minispärrnyckel. Med minispärrnyckel kommer du lättare åt alla olika skruvar och bultar. Mått: 165x90x35 mm.

Innehåll

• 1 st Minispärrnyckel för 1/4"+ 8 mm
• 10 st 1/4" hylsor, 5.5 - 14.0 mm
• 4 st Philips-bits, PH1, PH2, PH3, PH4
• 3 st Pozidrive-bits, PZD1, PZD2, PZD3
• 9 st Torx*-bits, T7, T8, T10, T15, T20, T25, T27, T30, T40
• 7 st Säkerhets-Torx*-bits, TP8, TP10, TP15, TP20, TP25, TP30, TP40
• 6 st Insex-bits, 3, 4, 5, 6, 7, 8 mm
• 3 st Spårbits, 4, 5.5, 7 mm
• 1 st 1/4" hylsadapter

Med spärranordning - varigenom momentnyckeln kan användas för såväl hela idragningen, som den slutliga kontrollen av vridmomentet. För såväl höger- som vänstergång - omställbar med spak, men med momentkontroll endast högergång. Försedda med vinkelmätare för efterdragning. Graderad i Nm och Ibf.ft. Låsbar inställning. Onoggrannhet ± 4%. Matt yta för lättare avläsning av momentinställningen. Gradmarkering för efterdragning av topplock m.m.Nr 1292AG-ER och 1292AG-E4R med momentkontroll för såväl höger som vänstergång.Individuellt kalibreringscertifikat medföljer varje momentnyckel.

Egenskaper

• Antal tänder: 24.0 (st)
• Art Nummer EAN: 5020385030251
• Art Nummer FinFono: 1581294
• Art Nummer MPN(s): 3892AG-E3
• Art Nummer UNSPSC: 27111715
• Benämning: MOMENTNYCKEL 3/8 110NM TT
• Dimension tapp: 3/8 (tum)
• ETIM-klasskod: EC002132
• Gångriktning: ['Vänster', 'Höger']
• Konstruktion: Klick
• Längd: 368 (mm)
• Momentområde, max (imperisk): 81.0 (lbf.ft)
• Momentområde, max (metrisk): 110.0 (Nm)
• Momentområde, min (imperisk): 14.0 (lbf.ft)
• Momentområde, min (metrisk): 19.0 (Nm)
• Momentriktning: Höger
• Momenttyp: Signalerande
• Onoggrannhet: ±4 (%)
• Tapptyp: Fyrkant
• Varumärke: TENGTOOL
• Vikt: 0.58 (kg)
• Vikt Brutto: 1,25
• Vikt Netto: 0,84

Assembly glove with studs. Glove made of nylon, dipped in nitrile with nitrile nubs. User-friendly glove that fits in most areas. With reinforced thumb and nubs in the palm for a good grip. Made of 15 gg gray nylon spandex liner. Dipping of foamed slim nitrile.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN ISO 21420:2020
EN 388 :2016+A1:2018 4121X

Ultrasonic cleaning for highly effective cleaning. The technology is based on high-frequency sound vibrations. The powerful pressure waves together with chemicals effectively loosen dirt, oxides, oil and other impurities on the washing object. The effect occurs wherever there is washing liquid, i.e. also in channels, bottom holes and the like. Made of stainless material and equipped with lid and side handle.

Combi package 18 V Li-Ion PowerPack. 
Contents: 
M18 BLDDRC Drill driver (carbon brushless). 
M18 BLIDRC Impact driver (carbon brushless). 
M18 FCS552 Circular saw (carbon brushless). 
M18 FBJS FUEL Jigsaw (carbon brushless). 
M18 FMT FUEL Multitool (carbon brushless). 
2 pc 5.0 Ah batteries, fast charger and soft storage bag.

Effective dehumidification of new construction, drying after water damage or to keep the humidity down in warehouses. Easy to handle. Large wheels and strong handle for easy movement on uneven surfaces. Easy to install - connects with a 230 volt plug. Condensate tank with overflow control. Tank volume 9 liters. Equipped with hour meter. Drain hose can be connected for constant emptying 3/4" external thread. Robust construction for professional use. Working temperature 0-35 degrees C.

Self-locking poly grip with extra grip width and quick adjustment. Adjustable in different number of positions: BT8PB (23 pos), BT10PB (27 pos), BT12PB (21 pos)
Industrial quality of chrome vanadium steel. Plastic covered legs.

Flush handle in standard design with comfortable grip. Fits Nilfisk professional pressure washers.

Powerful nut driver 18 V Li-Ion with carbon brushless motor. 1/2" drive with friction ring. Extremely compact design, only 152 mm long and perfect for use in tight spaces. Loosening torque of up to 881 Nm and tightening torque of up to 745 Nm. Redlink Plus electronics that ensure maximum performance and protect the tool against overload and overheating Drive Control with four modes that provide better precision thanks to a range of preset levels of revolutions and strokes per minute.The fourth mode is a precision mode with automatic shutdown that prevents over-tightening of bolts to a maximum of 47 Nm. The same position when loosening applies the maximum torque, as soon as the bolt is loosened, the speed is reduced, which reduces the risk of the nut or bolt falling out of the socket with three LED lights.Metal belt clip.Flexible battery system that fits all Milwaukee M18 batteries. 
Supplied without battery and charger.

High quality goatskin assembly glove. Inside and index finger in goatskin and upper part and collar in nylon. Lanolin- and DMFu-free.

Approved/Certified according to:
CE category 2
EN ISO 21420.2020
EN 388:2016+A1:2018

Single-adhesive age-resistant LDPE tape with mesh reinforcement. Soft and pliable with very strong adhesion to most materials; building polyethylene, metal, wood. Used, among other things, for assembly, sealing, splicing and repair of building foil intended for vapor and air barriers. Easy to work with and flexible with removable protective paper on the adhesive side, which allows you to tape easily even in tight spaces without the tape sticking to itself.
Type approved according to RISE Certification 1002 SC0960-17.
Thickness: 0.28mm
UV resistant: Yes
Aging resistant: Yes
Use temperature: -40 °C to +100°C
Application temperature: At least +5°C

Inflator for car tires. With venting device and clamping nipple for attachment to the valve, large manometer Ø 80 mm with heavy rubberized protective cover.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

Verktøykasse med kraftig forlengelseshåndtak og store hjul. Utstyrt med en stor uttrekkbar skuff. Konstruert av slagfaste polymerer for holdbarhet på arbeidsplassen. Metallforsterkede hjørner for ekstra holdbarhet. Sidemonteringsholdere passer på metallstengene. Sett med skillevegger og rom inkludert for ekstra organisering. Den uttrekkbare skuffen har en maks belastning på 68 kg inni, total maks belastning 113 kg. Inngår i Milwaukees modulære oppbevaringssystem Packout.

Drawer unit with two pull-out drawers with adjustable dividers that make it possible to adapt the drawer to the contents. Metal reinforced corners. Constructed of impact-resistant polymer. Steel ball bearings mean that each box can handle up to 11 kg of weight. With a locking device that prevents the drawers from being accidentally opened during transport and makes it possible to lock with a padlock. Included in Milwaukee's Packout modular storage system.

Efficient hot water washing with pressure-controlled relief system and hose reel. Automatic start/stop function. Equipped with steam operation up to 150°C. Built-in diagnostic system. Service indicator. Optimal mobility. Highly efficient 4-pole motor. Boiler with EcoMode function. Ceramic pistons. Brass top piece. Practical control panel. Large water inlet filter. 4 large wheels. Robust wheel brake. Easy to transport, can be easily pushed/pulled over uneven surfaces. Storage box. 
Standard equipment: High pressure hose 15 m on hose reel, Ergo 2000 flush handle with swivel, Ergo coupling, brass water inlet coupling, Tornado Plus flush pipe, Tornado Plus nozzle and water inlet filter.

Light and flexible gasoline-powered electric unit with Honda engine. Equipped with oil level monitor and voltage meter. Manual start. Protection class IP23.

Compact high-pressure washer 1-phase, 230 V with working pressure of max. 130 bar. For effective cleaning of heavily soiled surfaces. 15 m high-pressure hose on hose reel with foldable crank. Brass valve body and ceramic coated pistons. Equipped with automatic start and stop. Easy to transport. Integrated storage of flush tube and gun. Can be used both standing and lying down. Stainless steel manometer for easy reading of the working pressure. Robust chassis molded in one piece for easy transport and high stability. Integrated holder for high-pressure gun and cleaning lance. Quick coupling system D12. Max water temperature 60°C.
Standard equipment: Chemical injector, high pressure gun, Vario-Jet flush tube and dirtkiller flush tube.