Hand and air hydraulic workshop press for smaller workshops and semi-professional workshops. Capacity of 30 tons. The press piston is controlled by air hydraulics, which is operated with a foot pedal or hand pump. Laser cut frame with industrial seals. Double speed pump. The hydraulic cylinder is movable laterally. The press table can be raised and lowered with a winch. Accessory box at the foot of the press.
Supplied with press mandrel set in 8 parts.
Contents:
Ø 30 mm, max 15 tons
Ø 25 mm, max 13 tons
Ø 22 mm, max 12 tons
Ø 20 mm, max 10 tons
Ø 18 mm, max 8 tons
Ø 16 mm, max 6 tons
Ø 12 mm, max 3 tons
Ø 10 mm, max 2 tons

Nut driver with 3/4" square drive. Tightening torque of 1770 Nm and a loosening torque of 2700 Nm. Lowest weight in its class, easy to operate. Double hammer. Durable composite housing with steel hammer housing. Four torque settings and forward/reverse control. Exhaust air goes through the handle and the intake air through a 360º built-in swivel.

Portable 1-phase microprocessor-controlled induction heater. Water cooled. 10 different power levels. Heats a surface of 7x12x4 mm to 1000°C in 1 second. Heats through both rubber and plastic. Suitable for heating bolts and screws on vehicle undercarriage etc. The heat is created directly in the material without damaging nearby heat-sensitive components. Long operating time, thanks to efficient cooling system and large cooling water tank. Continuous operating time of 20 min at 20°C ambient temperature and maximum power. Equipped with 3 m induction cable, built-in cooling tank and wheels for easy movement.

Hand and air hydraulic workshop press for smaller workshops and semi-professional workshops. Capacity of 20 tons. The press piston is controlled by air hydraulics, which is operated with a foot pedal or hand pump. Laser cut frame with industrial seals. Double speed pump. The hydraulic cylinder is movable laterally. The press table can be raised and lowered with a winch. Accessory box at the foot of the press.
Supplied with press mandrel set in 8 parts.
Contents:
Ø 30 mm, max 15 tons
Ø 25 mm, max 13 tons
Ø 22 mm, max 12 tons
Ø 20 mm, max 10 tons
Ø 18 mm, max 8 tons
Ø 16 mm, max 6 tons
Ø 12 mm, max 3 tons
Ø 10 mm, max 2 tons

Reliable high-quality forklift truck. Strong hydraulics. Bogie wheels made of polyurethane with a small climbing wheel at the front to easily get under the pallet from the long side.

Combination package 18 V Li-Ion. 
Contents: 
DS 18DE Drill driver (carbon brushless). 
WH 18DE Impact screwdriver (carbon brushless). 
2 pcs 5.0 Ah Li-Ion MultiVolt batteries (BSL36A18), charger and stackable storage bag HSC3.

Compact and powerful drill driver 18 V Li-Ion with carbon brushless motor for longer operating time. Extra short model, total length of only 145 mm. 2-speed with high torque of 62 Nm. Drilling capacity in steel of 13 mm and in wood of 52 mm. 13 mm metal chuck. Battery indicator. Metal belt holder. LED lighting. Flexible battery system, fits all Milwaukee M18 batteries.
Standard equipment: 2 pcs 2.0 Ah Li-Ion batteries, charger, belt clip and storage bag.

Compact and ergonomic dry and wet vacuum cleaner with very high suction power. Push&Clean semi-automatic filter cleaning system. Power outlet for power tools and automatic start/stop function. Suction strength regulation. Soft start. Good storage of electric cable, accessories and tools. Antistatic container. Washable PET fleece filter element. The entire MultiFit accessory range fits. Low noise level.
Standard equipment: Suction hose (Ø32 mm, 2.5 m), 2 chrome extension tubes, floor nozzle, joint nozzle, washable PET fleece filter element, fleece filter bag and tool adapter.

Hoodie in BCI cotton with full zip and lined hood with drawstring. Two side pockets with zippers, the right pocket is equipped with a D-ring on the inside. Inside pocket on the left side. Looped inside (French Terry). Wash 60°C.
Materials: 80% cotton, 20% polyester, weight 320 g/m².

Approved/Certified according to:< OEKO-TEX 100

Gasoline-driven 4-stroke inverter gearbox. Quiet, efficient and compact. Easy to use and perfect for the campsite. Gives pure sine curve. Suitable for TV and computer.

Efficient jigsaw 12 V Li-Ion with carbon brushless motor. Saws up to 24 m in 19 mm OSB board with 4.0 Ah M12 battery. Tool-free Fixtec blade attachment for easy and quick blade changes. Tiltable table 0-45°. Pendulum function in four stages provides fast cutting in wood. Built-in exhaust that keeps the line of sight clear. LED lighting. Flexible battery system, fits all Milwaukee M12 batteries.
Supplied without battery, charger and storage bag.

Cutting and miter saw 18 V Li-Ion with carbon brushless motor. Electronic overload protection for both the tool and the battery. With double miter function, the saw head can be tilted both right and left 0°-48°. Miter capacity 55° to the left and 60° to the right. 254 mm saw blade for larger and more precise cuts. Quick mount to easily lock the saw in miter positions other than the fixed ones, both to the right and to the left. Large handrails provide maximum support for the material being cut. Height stop for tracking and folding. Up to 307 cuts in 38x89 mm soft wood with a 9.0 Ah battery. Durable steel table with fixed stops. Built-in handle for easy transport. LED lighting. Flexible battery system that fits all Milwaukee M18 batteries.
Standard equipment: Saw blade, blade wrench, side handle, combination clamp and extra high stops.
Supplied without battery, charger and storage bag.

Verktygssats TengTools TKS26R1033T är en Mega Master 26'' PRO35™ verktygssats med 1 033 delar i 16 lådor med 3-stegs kullagrade skenor, med 30 kg kapacitet per låda.Tre staplade, pulverbelagda enheter av högkvalitativt stål behandlat med fosfatfritt rostskydd (5-stegsbehandling). Bland egenskaperna kan nämnas tåliga länkhjul (5"), lådmattor av EVA-skum och kombinationslås med tre siffror på varje enhet. Omfattande verktygssats som innehåller hylsor, nycklar, skruvmejslar, tänger och specialverktyg för många olika mekaniska uppgifter. Uppbyggt kring TengTools moduluppbyggda verktygslösning, vilket gör att det är lätt att organisera verktygen och se om något verktyg saknas.

Egenskaper

• Antal delar: 1033.0 (st)
• Art Nummer EAN: 5020385215429
• Art Nummer MPN(s): TKS26R1033T
• Art Nummer UNSPSC: 27113201
• Benämning: VERKTYGSSET 1033 DELAR TENG TOOLS RÖD 26 TUM
• ETIM-klasskod: EC000149
• Varumärke: TENGTOOL
• Vikt: 197.5 (kg)
• Vikt Brutto: 223,53
• Vikt Netto: 223,53

Pallet jacks with setting with locking function. Extra large foot area that provides improved stability and also prevents the trestle from sinking into the ground. Locking system with safety pin. Supplied in pairs.
TÜV approved and GS certified.

Battery charger with jump start. Suitable for e.g. passenger cars, vans, pickups, mini trucks.
Normal charging: To get a long battery life, the charging current should be about 10% of the battery capacity.
Fast charging/Boost: Normal charging is the best for the battery. If you need fast charging, set the charger to boost mode. For the best care of the battery, a fast charging time of up to 15 min is suitable.

Kraftfull och kompakt hetvattentvätt med 3-fas motor. Rengör effektivt med varmt vatten tillsammans med högt tryck. Vattenkyld 4-polig motor med en robust axialpump med tre keramiska kolvar som genererar högt tryck. Max arbetstryck på 180 bar och max flödeshastighet på 800 l/h. Ångdrift som genererar en temperatur på 155°C. EASY!Force Advance spolhandtag med EASY!Lock snabblås. Start- och stoppautomatik. I eco!efficiency-läget anpassas maskinen till den mest kostnadseffektiva temperaturen (60°C) med fullt vattenflöde. Vid max arbetstryck och flödeshastighet uppnås vattentemperatur på 80°C, genom att reducera arbetstryck och flödeshastighet, vilket innebär att vattnet flödar långsammare genom pannan, kan max vattentemperatur på 98°C uppnås. Automatisk slangvinda för enkel in- och utmatning av högtrycksslangen. Slitstark 15 m Ultra Guard högtrycksslang med Teflon-beläggning. Avhärdare för att skydda värmeslingan mot förkalkning. Lätt tillgängligt vattenfilter skyddar pumpen mot smutspartiklar i vattnet. Säkerhetsventiler samt skydd för vatten eller bränslebrist säkerställer driftssäkerhet på maskinen. Integrerad bränsle- och rengöringsmedelstank. Exakt dosering av rengöringsmedel med sköljfunktion. Låsbart förvaringsfack för munstycken, verktyg m.m. Förvaringskrokar till elsladd. Integrerad spolrörshållare för enkel transport. Temperatur på inloppsvatten upp till 30°C. 
Standardutrustning: Spolhandtag EASY!Force Advance, spolrör 1050 mm, 15 m högtrycksslang på vinda och Powermunstycke.

Encased hose reel made of steel. Equipped with return spring. Polyurethane hose that stays soft even at low temperatures. Swivel wall bracket.
Max working pressure: 20 Bar.
Hose connection: 3/8".
Dimensions (LxWxH): 350x175x287 mm.

Microemulsion for cleaning and degreasing cars, trucks, buses, construction machinery and for engine washing. Dissolves asphalt splashes, salt, oil, grease and soot. High concentrate. Works in hard soft, warm and cold water. Works even on wet surfaces. Does not damage the car's rust protection. Rapid separation when used in oil separators.
pH concentrate: 10.
Dosage: 20-50%.

Light and robust saw table for cut-off and miter saws. With trolley function for mobile use also for mounted saw. Extendable length up to 4 m. Suitable for most cutting and miter saws on the market. Adjustable support leg for uneven surfaces. Adjustable support rollers. Supplied with mounting brackets and support with rollers and length stop.
Dimensions (LxWxH): 1680x785x920 mm.
Extendable length: 4000 mm.
Max load: 250 kg.
Weight: 25 kg.

Full-stretch artisan pants with removable tool pockets. Bits pocket with zipper, ruler pocket, knife buttons, pen pockets on both the right and left side. Back pockets with extra space. Double hammer handles and double attachment points for hammer holders. D-ring, carabiner, left leg pocket with zipper and recessed ID card pocket that can be hidden. All tool pockets reinforced with polyamide. Reflective details. Internal knee protector pockets with the possibility to adjust the placement of knee protectors at the right height. Drop-down hem for longer leg length. Pre-bent legs and reinforced crotch seam. Reinforced with polyamide in exposed areas. Wash 60°C.
Materials: Fluorescent 4-way stretch 92% polyester, 8% elastane, weight 275 g/m². Fluorescent 2-way stretch 83% polyester, 14% cotton, 3% elastane, weight 320 g/m². Contrast color 4-way stretch 51% polyamide, 41% polyester, 8% elastane, weight 235 g/m². Reinforcement 100% polyamide, weight 215 g/m².

Approved/Certified according to:
OEKO-TEX 100
EN ISO 20471 class 2

Powerful and reliable starting booster for 12 V vehicle batteries. Damages the electronics in the vehicle as it is electronically protected. Brass clamps that can be opened wide. The housing is molded in a 5 mm thick and durable layer of polyethylene. Extra long starter cables with very high conductivity. The automatic constant current electronic charger charges and maintains the battery in perfect condition so that the booster can provide full power at the start.

Powerful Li-Ion battery with extra long operating time. High power, fast charging and long life. Built-in rapid cooling function Cool-Cycle, active cooling technology to return to full capacity faster. The cooling function works with Milwaukee's supercharger M18 DBSC and fully charges in 45 minutes. Delivers extra high power in a more compact and lighter format. Optimized for the most charges and the best performance during battery life. Redlink technology that prevents overheating. Protected against weather and environmental conditions in the workplace. Resistant battery housing designed for increased protection against common oils, solvents and greases. B battery indicator that can also be read in direct sunlight. Compatible with all Milwaukee M18 tools.

Sortimentskasse med Heico-låseskiver. Skivene leveres parvis sammenlimt med skråstilte kammer mot hverandre. Utsidene har riller som låser mot underlag og skrue/mutter. Ved bevegelse i forbindelsen beveger skivene seg innbyrdes, hvor kammerne kiler seg fast mot hverandre og låser forbindelsen.
Overflatebehandling: ZinkFlake 
Innhold: 
30 par M6 (6,5x10,8x1,7 mm) 
30 par M8 (8,6x13,5x2,7 mm) 
30 par M10 (10,7x16,6x2,7 mm) 
20 par M12 (13,0x19,5x2,7 mm) 
20 par M14 (15,2x23,0x3,7 mm) 
15 par M16 (17,0x25,4x3,6 mm) 
15 par M20 (21,4x30,7x3,7 mm)

Effektiv dykkertpistol 18 V Li-Ion med to innstillinger som gjør det mulig for enkeltskudd for presisjon eller seriefyring for maksimal produktivitet. Ingen gasspatroner eller rengjøring kreves. Verktøyfri dybdejustering. Avfyrer opptil 1200 dykkert på en lading med 2,0 Ah batteri. Verktøyet avfyrer ikke hvis magasinet er tomt for dykkert. For rettbåndet 1,2 mm dykkert, 16-54 mm. Ulike munnstykker for den beste finishen oppbevares praktisk i verktøyet. LED-belysning. Fleksibelt batterisystem, passer alle M18-batterier. 
Standardutstyr: Belteklips. 
Leveres uten batteri, lader og oppbevaringskoffert.

Combo pack 18 V Li-Ion M18 Fuel PowerPack. 
Contents: 
M18 FPD3 Impact drill driver 
M18 FMTIW2F12 b> Nut driver with friction ring 
2 pcs 5.0 Ah Li-Ion batteries, charger and 2 pcs stackable HD boxes.

Light and flexible gasoline-powered electric unit with Honda engine. Equipped with oil level monitor and voltage meter. Manual start. Protection class IP23.

Pliers wrench that combines the function of a polygrip and a wrench. Smooth gripping jaws that provide a good grip without leaving marks. The narrow head provides a secure grip even in tight spaces. Plastic covered legs. Grip width 46 mm in 20 positions - easily adjusted with button setting. Made from drop-forged hardened steel.

Accessories for use together with compressors that have a capacity from approx. 130 l/min.
Contents:
Paint sprayer with 1 l cup.
Kerosene gun with 1 l cup.
Air filler with pressure gauge.
Cleaning gun.
Spiral hose 3 m with quick couplings.

Luminator Metal, mattsvart, kaxig och snygg kommer nu i LED-utförande.
Ljusen är mycket stabila och hållbara med hus och stadiga fot i pressgjuten metall. Den avancerade reflektortekniken och linsen, ger bästa ljusutbyte och det snyggt designade positionsljuset* ger karaktär åt fordonet även under dagens ljusa timmar.

Referenstal 50, vilket ger lång och lite smalare ljusbild.

LED positionsljus* i karaktäristisk design.

Multivoltsanslutning 9-32 Volt, vilket gör att de passar både person- och lastbilar.

Radioavstörningen av LED-elektroniken överträffar högsta klassificeringen.


* Godkänt som positionsljus endast om strålkastaren placeras och används enligt gällande reglemente.

Egenskaper

Diameter [mm]: 222 mm

Höjd [mm]: 233 mm

Djup [mm]: 130 mm

Lamptyp: LED

Vikt [g]: 2600 g

Referenstal: 50

Spänning från-till [V]: 9-32 v

Effektförbrukning [W]: 14,5 W

Räckvidd [m]: 600 m

Ursprungsland: RO

Tullkod: 85122000

Färdigblandad alkylatbensin med 2% helsyntetisk tvåtaktsolja som används till 2-takts motorer, vissa utombordare kan dock behöva inblandning av en särskild olja. Alkylatbensin är ett extra rent fossilt bränsle, upp till 99% renare än vanlig bensin och i stort sett fri från de mest skadliga ämnena som bensen och aromater. Avger betydligt färre farliga ämnen vid förbränning, vilket innebär mindre miljöpåverkan och en mycket bättre arbetsmiljö för användaren. Ger bättre prestanda och har en längre lagringstid, även efter långa stillestånd startar motorn lätt och bränslet håller fortfarande en hög kvalité. 
Uppfyller kriterierna för miljöklass 1 bensin samt Svensk Standard SS155461. Räknas till brandfarliga vätskor Klass 1.

Single-adhesive S-marked electrical and insulating tape. Holds cable bundles together as well as it insulates. Indispensable in automotive electrical contexts and for buried cables. Soft PVC film carrier and solvent-based synthetic rubber adhesive. Good adhesion even on low energy surfaces. Soft and flexible even at low temperatures. Non-corrosive adhesive, good resistance to water, weak acids and bases, most solvents and oils and UV light. Self-extinguishing. Contains no SVHC substances. Complies with EU Directive 2002/95/EC (RoHS). S-marked. Complies with EN 60454-3-1:1998+A1.
Thickness: 0.15 mm.
Operation temperature: -10°C to +80°C .
Electrical breakdown strength: 6 kV.

Hammer drill 18 V Li-Ion with carbon brushless motor. Delivers 5.0 J of impact force with low 6.9 m/s² vibrations. Drills up to 10 Ø18 x 100 mm holes on an M18 High Output 5.5 Ah battery. 4-position operation. Autostop protects the user against kickback. Tools and battery are protected against overload, overheating and discharge. SDS-plus mount. Control the tool through Milwaukee's ONE-KEY app via Bluetooth, check properties and save settings for specific application to easily and quickly adjust the tool. ONE-KEY also offers cloud-based inventory management platform that supports both location tracking and anti-theft. Compatible with Milwaukee M18 FPDDEXL vacuum cleaner.
Standard equipment: Side handle, metal depth stop, tool grease and stackable storage bag HD box.
Supplied without battery and charger.

High-foaming alkaline detergent and degreaser suitable for washing vehicles as well as facades or other surfaces. Simple and effective cleaning method. Applied with a foam sprayer. The foam then lingers and dissolves the dirt. Dissolves road dust, soot, pigment dirt and effectively removes insects. Used together with a foam sprayer with a dosage of 1:1 for best results. Can also be used as a car shampoo, then with a dosage of 1:100 in a washing bucket to hand sponge the vehicle.
pH value: 12.4 (concentrate).

Compact combi scrubber with 24 V battery operation, for daily cleaning in, for example, office environments, shops, hotels, schools, hospitals and workshops. Productive and powerful suction motor ensures a perfect cleaning result and a dry floor. Cutting width of 430 mm. Ergonomic handle with touch points, OneTouch button and guiding symbols make the machine easy to handle and use for new users. The cleaning settings can be changed while cleaning is in progress using three simple buttons on the control panel. Low noise level with Nilfisk SilenTech technology, reduces the noise level from 65 dB(A) all the way down to 60 dB(A) during quiet cleaning. Thanks to the curved, lightweight squeegee, the floor is always completely dry. Easy cleaning of the scraper on the suction squeegee. Easy replacement of the scrub brush. Can be used with either scrub brush or scrub pad. Dosing system for cleaning agents gives the user the option to clean with water only and only add cleaning agents when needed (0.25-2.0%). Flexible dispensing hose with flow control. Coarse filter in the dirty water tank. Protection class IPX4. Up to 4 hours of continuous scrubbing and drying on a fully charged battery, and up to 100 minutes before refilling with clean water.
Standard equipment: 2 pcs 12 V, 76 Ah GEL MONOBLOC batteries, battery charger, scrub brush Ø 430 mm, disc holder Ø 432 mm, suction scraper blade, extension cable 2 m, filling hose and timer 24 V.

Askfri tillsatskombination för att förhindra funktionsfel i SCR-systemet för dieselmotorer. Minskar bildningen av avlagringar i AdBlue-tanken och AdBlue-insprutningssystemet. Säkerställer den finaste finfördelningen av urealösningen genom att minska ytspänningen. Optimerar återföringen av AdBlue in i systemet och minimerar därmed risken för AdBlue-kristallisering. För alla SCR-system som arbetar med 32,5 % urealösning (AdBlue, DEF).
Ansökan
Tillsätt 0,25 % till AdBlue-lösningen (1:400). 25 ml räcker till 10 l AdBlue. 250 ml räcker till 100 l AdBlue. 2,5 l räcker till 1000 l AdBlue. För permanent användning.

OBS: Fyll inte på i bränsletanken!

Egenskaper

Ursprungsland: DE

Tullkod: 38119000

Safety boot with composite toe cap and steel nail tread protection. Water-repellent upper in microfiber. The elasticity element FlexEnergy is visible in the openings in the shoe's heel, which enables greater mobility for the element and thereby increases the shoe's flexibility. In the ankle part, there is Poron XRD padding that molds to the foot, supports the ankle and dampens shocks against it. Insole in three layers, a soft upper material, the middle layer that breathes and the bottom layer of EVA that is light and shock-absorbing. The Sievi TractionPro friction sole ensures a good grip. The sole is oil and chemical resistant and heat resistant up to 300°C. Boa lacing mechanism. Antistatic properties. 

Approved/certified according to: 
EN ISO 20345:2022 (S3, FO, HRO, SC, SR)
IEC 61340- 5-1 - ESD

Bandsaw with hydraulically controlled lowering with adjustable speed for optimized cutting. By pressing "PUSH" on the regulator for the hydraulics, sawing starts and the saw bar goes down. By pressing "PULL" it stops, when the saw is finished the saw and also the cooling pump stop automatically. Capable of miter sawing from 0° to 60° right. The gearbox runs in an oil bath. The saw frame and vise are cast iron. Safety switch on the blade guard and blade tension. Two speeds. Precision control of the blade with carbide lugs and adjustable bearings.

Powerful 125 mm angle grinder 18 V Li-Ion with carbon brushless motor, with a power equivalent to that of a 1200 W tool. Electronic overload protection in both tool and battery. Anti-kickback protection. Lockable switch with safety function that prevents automatic start. Small gear housing, narrow handle and angled battery for best access and user comfort. Integrated Fixtec system for quick, tool-free disc change. Vibrated side handle. Removable dust filter that prevents dust from entering the motor.
Standard equipment: Tool-less explosion protection, cut protection, anti-vibration extra handle, disc nut, key and removable dust covers.
Supplied without battery, charger and storage bag.

Sweatshirt jacket in BCI cotton with full zip. Two side pockets with zippers, the right pocket is equipped with a D-ring on the inside. Inside pocket on the left side. Looped inside (French Terry). Wash 60°C.
Materials: 80% cotton, 20% polyester, weight 320 g/m².

Approved/Certified according to:< OEKO-TEX 100

Quick angle with precise notch for parallel marking. Laser etched markings with best readability. Hole marking that facilitates cutting in pipes. Increased width for better grip.